Comment entretenir un plancher après l'avoir sablé?
Reading time: 3'

How to maintain a floor after sanding?

How to maintain a floor after sanding?

If you've recently had your floor sanded, you've made an excellent decision to rejuvenate your space. However, post-sanding maintenance is crucial to ensure the longevity and beauty of your floor. At Plancher Deluxe, we understand the importance of keeping a freshly sanded floor in perfect condition. In this article, we'll share our expert tips on maintaining your floor after sanding, so it stays beautiful for many years to come.

Thorough Cleaning

Thorough cleaning is the first essential step after sanding your floor. Here's how to do it effectively:

  1. Dust Residue Removal: After sanding, your floor will be covered in wood dust. Use a high-quality vacuum cleaner with an appropriate attachment to meticulously remove all the dust. Ensure your vacuum has a HEPA filter to capture even fine particles.

  2. Damp Cleaning: Next, use a slightly dampened soft cloth to clean the floor thoroughly. Make sure the cloth is not too wet, as excess moisture can damage the wood. Opt for cleaning products specifically designed for wooden floors.

  3. Avoid Abrasive Chemicals: Avoid using abrasive chemicals or ammonia-based cleaners, as they can harm the floor's finish. Always opt for gentle products designed for wooden floors.

Regular Maintenance

After the initial cleaning, it's important to regularly maintain your floor to preserve its beauty. Here are some tips for regular maintenance:

  • Use Rugs and Mats: Place rugs and mats at your home's entrance to prevent dirt, sand, and rocks from damaging your floor. Make sure to clean them regularly.

  • Avoid High Heels: High heels can cause deep scratches on the floor. Try to avoid them as much as possible indoors.

  • Use Felt Pads under Furniture: Stick felt pads under your furniture's feet to prevent scratches when moving them.

  • Avoid Excess Water: Avoid leaving puddles of water on the floor, as it can cause warping. Wipe up splashes or spilled liquids immediately.

Repairing Any Damage

Even with the best maintenance, your floor may suffer minor damage over time. Here's how to effectively repair it:

  • Light Scratches: For light scratches, you can use a colored pencil that matches your floor's shade to conceal imperfections. Then, apply a thin coat of varnish to seal it.

  • Chips or Dents: For chips or dents, use wood filler in the appropriate color to fill the damaged areas. Once dry, gently sand for a smooth surface, then apply varnish.

  • Loose Boards: If a board comes loose, use specialized wood floor adhesive to fix it. Make sure to apply pressure on the board until the adhesive dries.

Periodic Maintenance

In addition to regular maintenance, it's important to schedule periodic maintenance for your sanded floor. Here's what it involves:

  • Recoating: Over time, your floor's finish may wear down. It's recommended to recoat every 5 to 7 years, depending on the area's use. This will help preserve your floor's beauty.

  • Check Baseboards: Regularly inspect the condition of the baseboards and repair them if they're damaged.

  • Professional Repairs: If your floor sustains significant damage or stability issues, it's best to rely on professionals like Plancher Deluxe to perform the necessary repairs.

By following these post-sanding floor maintenance tips, you'll extend the lifespan of your investment and maintain an elegant and welcoming interior. At Plancher Deluxe, we take pride in providing high-quality floor sanding services in Montreal, Laval, Longueuil, South Shore, and North Shore. Contact us for more information on our services and maintenance solutions.

Leave a comment

Please note, comments need to be approved before they are published.